Rong Shunxi
Professor, doctoral supervisor, famous chemical engineering expert
Mr. Rong Shunxi graduated from Zhejiang University in 1965, majoring in chemical engineering. He was a visiting researcher in the Department of Chemical Engineering, Kansas State University, USA from November, 1981 to March, 1981. After staying at the university in 1965, he was engaged in the research work of multi-phase flow chemical reaction engineering, polymerization engineering and process system engineering, and presided over and completed the national key scientific and technological research project "Engineering Scale-up of Gas-phase Full density polyethylene process". The key scientific and technological research and development projects of Sinopec include "Research on Copolymerization of ethylene and a olefin to prepare polymer Alloy", "Development of condensation process in fluidized bed reactor of polyethylene by Vapor phase", "Engineering Research on design impregnation preparation technology of Highly efficient supported catalyst", "Engineering Technology Development of synthesis of vinyl chloride by oxygen chlorination" and "High density polyethylene production process by slurry method" and other provincial and ministerial scientific research projects, he published more than 30 papers. The main papers related to this topic are:
1. Huo Chao, Meng Rui, Ren Xiaohong, Yang Y
ongrong, Rong Shunxi, Fractal Evolving Theory and Growing Model of Olefin Polymerization Process，Chinese Journal of Chemical Engineering, 2003，11（1）：33-37
2. Huo C, Ren XH, Liu BP, Yang YR, Rong SX，Fractal Approach for modeling the morphology evolution of olefin polymerization with heterogenoues catalysts, Journal of Applied Polymer Science, 2003，90(6): 1463-1470
3. Chen Fengqiu, Wu Sufang, Chen Jizhong, Rong Shunxi, COD Removal Efficiencies of Some Aromatic Compounds in Supercritical Water Oxidation，Chinese Journal of Chemical Engineering, 2001，9（2）：137-140
4. ng, Rong Shunxi, Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles, Chinese Journal of Chemical Engineering, 2001,15 (3) : 266-271
5. Yang Jingquan, Chen Wei, Yang Yongrong, Rong Shunxi, Simulation of gas-phase polyethylene with condensed mode operation (Ⅰ) Analysis of reactor performance, Journal of Chemical Engineering, 2001,52 (10) : 877-884
6. Yang Jingquan, Chen Wei, Yang Yongrong, Rong Shunxi, Simulation of gas-phase polyethylene with condensed mode operation (Ⅱ) Analysis of overheat of polymer particles, Journal of Chemical Engineering, 2001,52 (10) : 885-890
7. Liao Guoqin, Cao Bin, Yang Yongrong, Rong Shunxi, Lv Dewei,Recent advances in the optimal synthesis of mass-exchange neyworks, Chemical Reaction Engineering and Technology, 2001,17 (1) : 66-72
8. Huo Chao, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Research for Morphology of Supported Polyolefin Catalyst and its Effect on Polymerization Activity Using Fractal Theory, 2000,14 (6) : 570-576
9. Huo Chao, Ren Xiaohong, Zong Yingwei, Liu Baiping, Yang Yongrong, Rong Shunxi,Preparation and Fractal Morphology of Ti-Mg Polyethylene Catalyst, Petrochemical Industry, 1999,28 (12) : 820-823
10. Yang Yongrong, Rong Shunxi, Huo Chao et al., Morphology Evolution and Mechanism of Fractal Growth in Ethylene Polymerization Process, Proceedings of third joint China/USA chemical engineering conference, Sept. 25-28, 2000, Beijing, China
11. Liu Baiping, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Thermoactivation Processes of Silica Support for Polyolefin Catalyst, Journal of Chemical Engineering of Chinese Universities, 1999,13 (2) : 169-172
12. Ren Xiaohong, Liu Baiping, Yang Yongrong, Rong Shunxi, Chemical modification of silica gel carrier surface, Proceedings of the 9th Annual Meeting of the Chinese Society of Chemical Engineering, 1998:685-689
13. Liu Baiping, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Study on silica-supported polyolefin catalysts (I) TEM and SAED study on different types of silica-supported thermal activated particles, The Chinese Journal of Nonferrous Metals, 1998,8 (Supp.2) : 26 ~ 29
14. Liu Baiping, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Study on silica-supported polyolefin catalysts (II) TEM and SAED study on silica-supported catalysts and catalyst particles, Chinese Journal of Nonferrous Metals, 1998,8 (Supp.2) : 30 ~ 32
15. Liu B.P., Ren X.H., Yang Y.R., Rong S.X., Pore Structure Characterization of The Polyethylene Catalysts By N2 Isothermal Adsorption Method，Proceedings of The Second China-Korea Conference On Separation Science and Technology, CKCSST’98, 326～330
16. Liu B.P., Ren X.H., Yang Y.R., Rong S.X., The Chemisorption Of AlEt3 on Silica Gel Surface in n-Hexane Solvent.Proceedings of The Second China-Korea Conference On Separation Science and Technology, CKCSST’98, 337～341
17. Liu Baiping, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Research on silica-supported polyolefin catalysts (I) Support macromorphology and its effect on thermal activation, Chemical Reaction Engineering and Technology, 1997,13 (3) : 231-238
18. Liu Baiping, Ren Xiaohong, Yang Yongrong, Rong Shunxi, Pore structure analysis of silica gel support for polyolefin catalyst, Chinese Journal of Nonferrous Metals, 1996, 6(Supp. 2) : 450-452
19. Liu B.P., Min Z., Ren X.H., Yang Y.R., Rong S.X., Reaction Between TiCl4-n-hexane Solution and Groups on the Surface of Silica Gel，Proceedings of the 1996 Asian-Pacific Chemical Reaction Engineering Forum, Vol.2, Beijing, 1996, 578-583
20. Liu B.P., Ren X.H., Yang Y.R., Rong S.X., Studies On Supported Polyolefin Catalysts —The Role of Mechanical Strength Of Catalysts and Its Ultrasonic Characterization Proceedings of APCRE’99, HongKong
